All tender opportunities
Opportunity brief
Closes in 20 daysSUPPLY AND DELIVRY OF VARIOUS LINE HARDWARE ITEMS FOR “AS AND WHEN REQUIRED” BASIS FOR A PERIOD OF 05 FIVE YEARS.
- Other sectors
- Public sector
- South Africa

- Buyer / issuer
- ESKOM
- Sector
- Other sectors
- Country / region
- North West, South Africa
- Public or private
- Public sector
- Closing date
- 27 Nov 2026, 10:00 SAST
- Closes in 20 days
- Estimated value
- Not stated
- Submission method
- Hard copy, to the delivery address below
- Tender number
- E3602DXNWOU
- Status
- Active
Scope summary
SUPPLY AND DELIVRY OF VARIOUS LINE HARDWARE ITEMS FOR “AS AND WHEN REQUIRED” BASIS FOR A PERIOD OF 05 FIVE YEARS.
Category: Supplies: General
Key requirements
- Procurement method: Request for Bid(Open-Tender)
- Briefing session: Optional briefing · 02 Nov 2026, 10:00 SAST · MS TEAMS
- Eligibility and evaluation: set out in the tender documents. Check mandatory returnables, registrations and scoring before you commit.
Required documents
- ALTMP_PFS_11.pdfOpen (opens the source site)
- RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdfOpen (opens the source site)
- Supplier Declaration of Interest Template.docxOpen (opens the source site)
- Test Report Schedule 3089pdf.pdfOpen (opens the source site)
- TECHNICAL EVALUATION.pdfOpen (opens the source site)
- Fittings for Bare Neutral Aerial Bundled Conductor.pdfOpen (opens the source site)
- ROD ANCHR NON ADJUST 34KN.pdfOpen (opens the source site)
- Deviation schedule.pdfOpen (opens the source site)
- Test Schedule D3008.pdfOpen (opens the source site)
- Eskom Drawing D3008.pdfOpen (opens the source site)
- 3102.pdfOpen (opens the source site)
- PR.zipOpen (opens the source site)
- STEEL GRADES AND WELDING REQUIREMENTS FOR STEELWORK.pdfOpen (opens the source site)
- Copy of Line Hardware SAP numbers.xlsxOpen (opens the source site)
- Drawing 3039.pdfOpen (opens the source site)
- Test Schedule Clamps IPC.pdfOpen (opens the source site)
- OUTDOOR LOW VOLTAGE PORCELAIN.pdfOpen (opens the source site)
- Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdfOpen (opens the source site)
- Test Report Schedule D-DT 3065.pdfOpen (opens the source site)
- E-tendering Help Manual for supplier - 27 January 2025 (1).docxOpen (opens the source site)
- Test Report Schedule.pdfOpen (opens the source site)
- NUT, EYE M16 AND M20.pdfOpen (opens the source site)
- ALTMP_PFS_24.pdfOpen (opens the source site)
- ST_240-93022072 Rev 1 AL_CU 3058.pdfOpen (opens the source site)
- Line Hardware - service contract SHE Spec -01-10-2026 revised.pdfOpen (opens the source site)
- ALTMP_PFS_15.pdfOpen (opens the source site)
- 3039.pdfOpen (opens the source site)
- Deviation Schedule-Side Groove Tie.pdfOpen (opens the source site)
- Technical Schedule D3171.pdfOpen (opens the source site)
- Deviation Schedule DDT 3067.pdfOpen (opens the source site)
- Technical Schedules A and B D 3065 SAP 402527.pdfOpen (opens the source site)
- ST_240-75882302 Rev 1.pdfOpen (opens the source site)
- Deviation Schedule D3089.pdfOpen (opens the source site)
- STEEL GRADES AND WELDING REQUIREMENTS.pdfOpen (opens the source site)
- Test Report Schedule DDT3067.pdfOpen (opens the source site)
- Drawing 3039.pdfOpen (opens the source site)
- Deviation schedule.pdfOpen (opens the source site)
- Deviation Schedule D3098.pdfOpen (opens the source site)
- Line Hardware NW 2026.pdfOpen (opens the source site)
- Tech Schedule.pdfOpen (opens the source site)
- Spec Sheet.pdfOpen (opens the source site)
- D DT 3074_Tech Schedule_Aluminium Lug-Indent_Rev1_072021.xlsOpen (opens the source site)
- Deviation Schedule D3008.pdfOpen (opens the source site)
- ALTMP_PFS_21.pdfOpen (opens the source site)
- RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3065.pdfOpen (opens the source site)
- E-Tenderers E-Tendering Training Acknowledgement Form - 27 January 2025 (1).docxOpen (opens the source site)
- Technical Schedules A and B D 3065 SAP 402511.pdfOpen (opens the source site)
- 3058.pdfOpen (opens the source site)
- ALTMP_PFS_22.pdfOpen (opens the source site)
- D3008.pdfOpen (opens the source site)
- Technical.zipOpen (opens the source site)
- Deviation schedule DDT3228.pdfOpen (opens the source site)
- Test Schedule Clamps IPC.pdfOpen (opens the source site)
- Deviation schedule.pdfOpen (opens the source site)
- 3228.pdfOpen (opens the source site)
- ROD THRDD.pdfOpen (opens the source site)
- COMMON BASE AND STANDARD PASSIVE UNITS FOR SINGLE PHASE 230V SERVICE CONNECTIONS.pdfOpen (opens the source site)
- Life-Saving Rules (1).pdfOpen (opens the source site)
- 3074.pdfOpen (opens the source site)
- Deviation Schedule DDT 3067.pdfOpen (opens the source site)
- Technical Schedule A and B for Grip, Strain.pdfOpen (opens the source site)
- Test report Schedule DDT 3039.pdfOpen (opens the source site)
- D3067.pdfOpen (opens the source site)
- ALTMP_PFS_20.pdfOpen (opens the source site)
- Deviation Schedule D3008.pdfOpen (opens the source site)
- DSP_34-194.pdfOpen (opens the source site)
- Helically formed hardware-Standard.pdfOpen (opens the source site)
- Eskom Drawing D3008.pdfOpen (opens the source site)
- Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdfOpen (opens the source site)
- Test Report Schedule DDT3067.pdfOpen (opens the source site)
- Test Report Schedule 3089pdf.pdfOpen (opens the source site)
- Deviation Schedule.pdfOpen (opens the source site)
- ALTMP_PFS_14.pdfOpen (opens the source site)
- Test report Schedule DDT 3039.pdfOpen (opens the source site)
- Technical Schedules A and B for.pdfOpen (opens the source site)
- SDL & I UNDERTAKING Line Hardware Final.pdfOpen (opens the source site)
- D3067.pdfOpen (opens the source site)
- 3065.pdfOpen (opens the source site)
- 3228.pdfOpen (opens the source site)
- Deviation Schedule D3089.pdfOpen (opens the source site)
- Technical Schedules A and B.pdfOpen (opens the source site)
- Drawing.pdfOpen (opens the source site)
- 3089.pdfOpen (opens the source site)
- TECHNICAL BULLETIN.pdfOpen (opens the source site)
- Line Hardware Invitation to Tender (ITT).pdfOpen (opens the source site)
- Deviation Schedule for Clamps IPC.pdfOpen (opens the source site)
- 240-75883110 Current-Carrying Compression Fittings for Overhead Reticulation Systems D3098.pdfOpen (opens the source site)
- 3089.pdfOpen (opens the source site)
- 3075.pdfOpen (opens the source site)
- ALTMP_PFS_23.pdfOpen (opens the source site)
- D DT 3127_ Test Report Schedule.pdfOpen (opens the source site)
- SIGN DANGER.pdfOpen (opens the source site)
- STAPLE GALVANISED WIRE 40LG X 4WD D3129.pdfOpen (opens the source site)
- Technical Schedules A and B.pdfOpen (opens the source site)
- ABC Schedule DDT3067.pdfOpen (opens the source site)
- 3039.pdfOpen (opens the source site)
- 32-95 Occupational Health and Safety Incident Management Procedure (2).pdfOpen (opens the source site)
- Technical Schedules A and B.pdfOpen (opens the source site)
- Technical Schedules A and B D3089.pdfOpen (opens the source site)
- Technical Schedule Clamp IPC D3039.pdfOpen (opens the source site)
- Technical Schedules A and B D 3065 SAP 402521.pdfOpen (opens the source site)
- SHACKLE STRAIGHT PIN TYPE 70kN D3010.pdfOpen (opens the source site)
- ABC Schedule DDT3067.pdfOpen (opens the source site)
- Deviation Schedule.pdfOpen (opens the source site)
- Fittings for Bare Neutral Aerial Bundled Conductor.pdfOpen (opens the source site)
- 240-75883122 - Fittings for Bare Neutral Aerial Bundled Conductor D3089.pdfOpen (opens the source site)
- ST_240-75882302 Rev 1.pdfOpen (opens the source site)
- 1076237191.zipOpen (opens the source site)
- Schedules A and B D 3098.pdfOpen (opens the source site)
- ALTMP_PFS_13.pdfOpen (opens the source site)
- line Hardware NW BOQ - ITT.xlsxOpen (opens the source site)
- PASSIVE BASE UNIT, ED AND PASSIVE BASE UNIT, ECU, COVER - Copy.pdfOpen (opens the source site)
- 3127.pdfOpen (opens the source site)
- 3039.pdfOpen (opens the source site)
- Technical Criteria For Procurement.pdfOpen (opens the source site)
- PASSIVE BASE UNIT, ED AND PASSIVE BASE UNIT, ECU, COVER.pdfOpen (opens the source site)
- ALTMP_PFS_17.pdfOpen (opens the source site)
- Technical Schedule Clamp IPC D3039.pdfOpen (opens the source site)
- ALTMP_PFS_1.pdfOpen (opens the source site)
- Technical Schedules A and B- Side Groove Tie.pdfOpen (opens the source site)
- D3008.pdfOpen (opens the source site)
- Test report Schedule DDT 3039.pdfOpen (opens the source site)
- 3098.pdfOpen (opens the source site)
- Test Schedule D3008.pdfOpen (opens the source site)
- PLATE STAY M12 300.pdfOpen (opens the source site)
- Deviation Schedule for Clamps IPC.pdfOpen (opens the source site)
- Fittings for Bare Neutral Aerial Bundled Conductor.pdfOpen (opens the source site)
- STEEL GRADES AND WELDING REQUIREMENTS FOR STEELWORK AND OVERHEAD LINE HARDWARE COMPONENTS.pdfOpen (opens the source site)
- SPECIFICATION FOR NON-METALLIC CABLE GLANDS STANDARD.pdfOpen (opens the source site)
- Eskom_-_Standard_Conditions_of_Tender_-_30_January_2025 - JAN 2030.pdfOpen (opens the source site)
- New Microsoft Word Document.docxOpen (opens the source site)
- Technical Schedules A and B D3089.pdfOpen (opens the source site)
- 240-12248652_List of Tender Returnables_Cat 2_ Rev 7.docxOpen (opens the source site)
- ALTMP_PFS_16.pdfOpen (opens the source site)
- 240-75883128 Rev 2 AL_AL 3058.pdfOpen (opens the source site)
- SPINDLE SHORT M20x50 REGULAR SHANK D3050.pdfOpen (opens the source site)
- Standard.pdfOpen (opens the source site)
- NUT,HX GALV M6 D3173.pdfOpen (opens the source site)
- Schedules A and B D3228.pdfOpen (opens the source site)
- 240-75883122 - Fittings for Bare Neutral Aerial Bundled Conductor D3089.pdfOpen (opens the source site)
- OHS Tender Evaluation low risk work - Line hardware.pdfOpen (opens the source site)
- Test Schedule Clamps IPC.pdfOpen (opens the source site)
- Deviation schedule DDT3228.pdfOpen (opens the source site)
- Test Report Schedule D3098.pdfOpen (opens the source site)
- ALTMP_PFS_18.pdfOpen (opens the source site)
- PASSIVE BASE UNIT, ED AND PASSIVE BASE UNIT, ECU, COVER.pdfOpen (opens the source site)
- Deviation schedule D-DT 3065.pdfOpen (opens the source site)
- Technical Schedules A and B for.pdf D3127.pdfOpen (opens the source site)
- SPEC SHEET.pdfOpen (opens the source site)
- Schedules A and B D3228.pdfOpen (opens the source site)
- THIMBLE, ST TO FIT 14 WIRE.pdfOpen (opens the source site)
- D-DT-3075 - Tech Schedule - Cable tie.pdfOpen (opens the source site)
- Spindles and Spindles with.pdfOpen (opens the source site)
- Drawing 3039.pdfOpen (opens the source site)
- ALTMP_PFS_19.pdfOpen (opens the source site)
- COMMON BASE AND STANDARD PASSIVE UNITS FOR SINGLE PHASE 230V SERVICE CONNECTIONS.pdfOpen (opens the source site)
- RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS.pdfOpen (opens the source site)
- ALTMP_PFS_12.pdfOpen (opens the source site)
- TECHNICAL EVALUATION CRITERIA FOR LV CABLE ACCESSORIES.pdfOpen (opens the source site)
- Drawing and Test Report Schedule LV cable Accessories.pdfOpen (opens the source site)
- BOLT,PIGTAIL ASSY.pdfOpen (opens the source site)
- ALTMP_PFS_2.pdfOpen (opens the source site)
- 240-75883154 COMPRESSION FITTINGS AND CLAMPS FOR OVERHEAD SUB-TRANSMISSION SYSTEMS D3098.pdfOpen (opens the source site)
- Technical Schedules A and B Connector Lug.pdfOpen (opens the source site)
- NEC SC Line Hardware ITT.docOpen (opens the source site)
- RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS.pdfOpen (opens the source site)
- 240-68099512 Form A_Cat 2_ Rev 9.pdfOpen (opens the source site)
- Deviation Schedule for Clamps IPC.pdfOpen (opens the source site)
Important dates
- Published
- 22 Oct 2026
- First seen by Atlas
- 04 Nov 2026
- Briefing session
- Optional briefing · 02 Nov 2026, 10:00 SAST · MS TEAMS
- Submission deadline
- 27 Nov 2026, 10:00 SAST
Contact and submission
- Contact person
- Refilwe Phetla
- phetlaRe@eskom.co.za
- Phone
- 011-800-5400
- Submission
- Hard copy submission
- Deliver to
- Various Places in the Northwest OU
As published by the buyer on eTenders. Confirm details against the tender documents.
Commercial snapshot
- Estimated value
- Not stated in the notice
- Contract type
- Request for Bid(Open-Tender)
- Category
- Supplies: General
- Source
- SA National Treasury eTenders
How ABM can help
- Manage the Bid: A structured response, from the opportunity decision to the final submission.
- Develop the Response: Clear writing, considered production and approved material ready for reuse.
- Build Bid Capability: Practical support that strengthens how your business prepares and responds.
Live data from Atlas Tender Intelligence, gathered from official procurement portals and refreshed daily. Always confirm details on the original notice.
Related opportunities
View all in South Africa- Closes in 9 dayspublic
Tender for the repairs and maintenance of sanitation infrastructure within the city of Tshwane boundaries on an as and when required basis for a three (3) year period
City of Tshwane
Gauteng, South AfricaCloses 16 Nov 2026Engineering & Infrastructure - Closes in 9 dayspublic
Tender invitation for the long-term lease and development of the following Council-owned property: Erf 551 Pretoria (HB Phillips Building) and Portions of the remainder of Erf 599, Erf 600, portion 1 of Erf 3092, remainder of portion 1 of Erf 601, portion 2 of Erf 602, remainder of Erf 602, 12705 and remainder of Erf 603 Pretoria
City of Tshwane
Gauteng, South AfricaCloses 16 Nov 2026 - Closes in 9 dayspublic
The selection of Strategic Partners for the development, financing, and implementation of up to 6GW of utility scale renewable energy projects; including Eskom owned and Strategic Partner owned projects for a period of 5 years
ESKOM
Gauteng, South AfricaCloses 16 Nov 2026Mining, Energy & Industrial